- Turbine Turbocharger
- Oil cooled only
- 6 blade propeller
- Compressor Specs :
4" Compressor Inlet
2.226" or 56.55mm Inducer
2.552" or 74.83mm Major
Compressor .70 A.R.
Compressor 75 Trim
- Turbine Specs :
Twin Entry Type
11 Blade Type
Turbine .84 A.R.
Turbine 60 Trim
2.894" or 73.50mm Major
2.275" or 57.78mm Minor
- Made to use external wastegate
- Uses T3 Exhaust flange (Dual Entry)
- 4.0" Performance Aluminum High Flow Velocity Stack
- CNC Machined From AL6061-T6 Billet Aluminum With An Anodized Finish
- Best Used On Highly Modified Or Turbocharged Vehicles Where Higher Air Flow Can Be Obtained
- Work With: Piping Kits , Short Ram Intake , Cold Air Intake , Turbocharger , Supercharger
- * Required To Check Your Vehicles Air Filter Size For Correct Fitment Before Purchase *
Heat Shield Cover:
- High quality stainless steel mesh wire inner lining w/ silicone impregnated fiber glass material
- Heavy duty turbo blanket wrapped around
- Stainless rivets and springs
- Helps decrease turbo heat from spreading into the engine bay
- Can hold up to 2,000 degree Fahrenheit
- 3.6"" Width
Oil Return Drain Line:
- Oil Drain/Return Line
- 22"" Stainless steel hose, braided for heat and pressure resistance, strength and durability
- Oil Return Line made for turbo
- Helps circulate oil from the turbo to the oil pan
- T3 Based Turbo Charger Only (Works only on Metal Oil Pans)
Oil Line Kit:
- Made out of high quality stainless steel.
- Oil feed line for turbo.
- 1/8 size oil feedline with -4an fitting.
- Threads in m10x1.5 turbo restricter plate with threaded 1/8npt on top, so it will allow you to use a 90 or straight -4an fitting.
- By using this oil line kit,it will allow you to convert or replace your oem line. 36"" long,1/8npt male end and -4female end.
- Adapter is made out of high quality steel,and supply 90 and straight -4an fitting.
- This line is made for t3 based center sections using m10x1.5 thread
- Built in Turbo timer ( Auto and Manual )
- 2 Channel output, activate NITROUS or INTERCOOLER SPRAYER
- Features built in absolute pressure sensor
- Display will allow you to see real time voltage, boost, vacuum and high and low setting
- Will allow to run 2 boost setting either High and Low boost settings, adjustable to users preference.
- Adjustable gain (how slow or quickly the wastegate opens). Records highest boost pressure reached and also last peak boost while driving, Peak boost warning.
- The 12v 2 channel options on our kits is a great feature to allow you to get more out of your car.You can control systems such as nitrous or an intercooler sprayer all based off of boost pressures.
- With the turbo timer functions, you can select with this auto or manual settings that you can program.Either allow the boost controller to figure how long the car should run depending on boost levels reached during the prior driving select your preset run time.
- The controller has a function built in with an audible warning to notify the driver without have to see the boost gauge that the car has exceeded the set highest boost setting.
- Along with our kit, you will see below we have a full instruction packet that will go along with this.This will detail the full install process and basic knowledge of the way the system works is necessary to complete the install.Everything is included as you can see from the photo below to get the kit installed
- Wastegate has successfully addressed these issues by optimizing valve lift and the flow path through the body.
Works with single or twin turbos, and runs internal or external wastegates up to 25.5PSI. This has a high quality internal pressure sensor, and a high quality fast response boost control solenoid
- Instructions are included!
- 100% Brand New Items, Never Used Or Installed
- Made By OEM An Approved & ISO Certified Manufacturers In Materials That Meet Or Exceeds Strict OEM Requirements
- There Is No Installation Guide Included, We Highly Recommend Professional Installation