Make/Model

Turbo + Velocity Stack + Oil Line+ Heat Shield + Wastegate + Boost Control Blue

List price: $709.99
Our price: $303.99
You save: $406.00 ( 57.18 %)

Availability: Sold out

GENERAL
DETAILS

T70 TURBOCHARGER:

  • Turbine Turbocharger
  • Oil cooled only
  • 6 blade propeller
  • Compressor Specs :
    4"""" Compressor Inlet
    2.226"""" or 56.55mm Inducer
    2.552"""" or 74.83mm Major
    Compressor .70 A.R.
    Compressor 75 Trim
    M14 Compressor
  • Turbine Specs :
    Twin Entry Type
    11 Blade Type
    58.18mm Exducer
    Turbine .84 A.R.
    Turbine 60 Trim
    2.894"""" or 73.50mm Major
    2.275"""" or 57.78mm Minor
  • Made to use external wastegate
  • Uses T3 Exhaust flange (Dual Entry)


Velocity Stack:

  • 4.0" Performance Aluminum High Flow Velocity Stack
  • CNC Machined From AL6061-T6 Billet Aluminum With An Anodized Finish
  • Best Used On Highly Modified Or Turbocharged Vehicles Where Higher Air Flow Can Be Obtained
  • Work With: Piping Kits , Short Ram Intake , Cold Air Intake , Turbocharger , Supercharger
  • * Required To Check Your Vehicles Air Filter Size For Correct Fitment Before Purchase *

Heat Shield Cover:

  • High quality stainless steel mesh wire inner lining w/ silicone impregnated fiber glass material
  • Heavy duty turbo blanket wrapped around
  • Stainless rivets and springs
  • Helps decrease turbo heat from spreading into the engine bay
  • Can hold up to 2,000 degree Fahrenheit
  • 3.6"" Width

Oil Return Drain Line:

  • Oil Drain/Return Line
  • 22"" Stainless steel hose, braided for heat and pressure resistance, strength and durability
  • Oil Return Line made for turbo
  • Helps circulate oil from the turbo to the oil pan
  • T3 Based Turbo Charger Only (Works only on Metal Oil Pans)

Oil Line Kit:

  • Made out of high quality stainless steel.
  • Oil feed line for turbo.
  • 1/8 size oil feedline with -4an fitting.
  • Threads in m10x1.5 turbo restricter plate with threaded 1/8npt on top, so it will allow you to use a 90 or straight -4an fitting.
  • By using this oil line kit,it will allow you to convert or replace your oem line. 36"" long,1/8npt male end and -4female end.
  • Adapter is made out of high quality steel,and supply 90 and straight -4an fitting.
  • This line is made for t3 based center sections using m10x1.5 thread

Boost Controller:

  • Manual Turbo Boost Controller
  • In order avoid replacing wastegate springs, which only give a fixed increase, which is not adjustable, a boost controller will be the most cost effective solution 
  • Allows adjustable boost psi settings, light weight design to be mount under the hood
  • CNC Aluminum Body with Anodized color finish
  • Light weight and can be placed anywhere.
  • Universal fitment for turbocharged vehicles. (Stock or Aftermarket)

Turbo External Wastegate:

  • CNC billet aluminum T6061 housing for heat disbursement
  • Clamps flange set up for turbo applications
  • 35mm / 38mm
  • Compact Version V-Band Type
  • Base housing with forged stainless steel valves construction
  • Heavy duty actuator diaphragm withstands temperatures up to 490 degrees Celsius
  • High temperature silicone reinforced actuator diaphragm inner design
  • External wastegates are commonly used for fast spooling and keep back pressure to a minimum and still regulating boost levels more precisely than internal wastegates in high power applications, where high boost levels can be achieve

NOTES:

  • 100% Brand New Items, Never Used Or Installed
  • Made By OEM An Approved & ISO Certified Manufacturers In Materials That Meet Or Exceeds Strict OEM Requirements
  • There Is No Installation Guide Included, We Highly Recommend Professional Installation