- Turbine Turbocharger
- Oil cooled only
- 6 blade propeller
- Compressor Specs :
4" Compressor Inlet
2.226" or 56.55mm Inducer
2.552" or 74.83mm Major
Compressor .70 A.R.
Compressor 75 Trim
- Turbine Specs :
Twin Entry Type
11 Blade Type
Turbine .84 A.R.
Turbine 60 Trim
2.894" or 73.50mm Major
2.275" or 57.78mm Minor
- Made to use external wastegate
- Uses T3 Exhaust flange (Dual Entry)
- 4.0" Performance Aluminum High Flow Velocity Stack
- CNC Machined From AL6061-T6 Billet Aluminum With An Anodized Finish
- Best Used On Highly Modified Or Turbocharged Vehicles Where Higher Air Flow Can Be Obtained
- Work With: Piping Kits , Short Ram Intake , Cold Air Intake , Turbocharger , Supercharger
- * Required To Check Your Vehicles Air Filter Size For Correct Fitment Before Purchase *
Heat Shield Cover:
- High quality stainless steel mesh wire inner lining w/ silicone impregnated fiber glass material
- Heavy duty turbo blanket wrapped around
- Stainless rivets and springs
- Helps decrease turbo heat from spreading into the engine bay
- Can hold up to 2,000 degree Fahrenheit
- 3.6"" Width
Oil Return Drain Line:
- Oil Drain/Return Line
- 22"" Stainless steel hose, braided for heat and pressure resistance, strength and durability
- Oil Return Line made for turbo
- Helps circulate oil from the turbo to the oil pan
- T3 Based Turbo Charger Only (Works only on Metal Oil Pans)
Oil Line Kit:
- Made out of high quality stainless steel.
- Oil feed line for turbo.
- 1/8 size oil feedline with -4an fitting.
- Threads in m10x1.5 turbo restricter plate with threaded 1/8npt on top, so it will allow you to use a 90 or straight -4an fitting.
- By using this oil line kit,it will allow you to convert or replace your oem line. 36"" long,1/8npt male end and -4female end.
- Adapter is made out of high quality steel,and supply 90 and straight -4an fitting.
- This line is made for t3 based center sections using m10x1.5 thread
- Manual Turbo Boost Controller
- In order avoid replacing wastegate springs, which only give a fixed increase, which is not adjustable, a boost controller will be the most cost effective solution
- Allows adjustable boost psi settings, light weight design to be mount under the hood
- CNC Aluminum Body with Anodized color finish
- Light weight and can be placed anywhere.
- Universal fitment for turbocharged vehicles. (Stock or Aftermarket)
Turbo External Wastegate:
- CNC billet aluminum T6061 housing for heat disbursement
- Clamps flange set up for turbo applications
- 35mm / 38mm
- Compact Version V-Band Type
- Base housing with forged stainless steel valves construction
- Heavy duty actuator diaphragm withstands temperatures up to 490 degrees Celsius
- High temperature silicone reinforced actuator diaphragm inner design
- External wastegates are commonly used for fast spooling and keep back pressure to a minimum and still regulating boost levels more precisely than internal wastegates in high power applications, where high boost levels can be achieve